top of page

CNC Precision Laser Cutting

Mild/Tool Steel

We have the capability to cut up to 1" thick Mild/Tool Steel.

Largest stock sheet size is 5'x10' for 20ga-1/2" thick & 4'x10' for 5/8"-1" thick

Laser tolerances are +/-.004"

Most material thicknesses will have a very smooth and clean edge with some minor oxidation. Generally in thicker plate (over 1/2") you will see striations on the cut edge, however any rough burr or tears will be cleaned in house to keep customer's handling of this issue to a minimum. If the oxidation is problematic for any extra processes, i.e. Powder Coating, we can cut with Nitrogen to eliminate the oxidation.

Stainless Steel

We have the capability to cut up to 5/8" thick Stainless Steel

Largest stock sheet size is 5'x10' for 20ga-1/2" thick & 4'x10' for 5/8" thick

Laser tolerances are +/-.004"

We have experience with various grades of Stainless and all cut very cleanly on the laser. We remove any burr prior to shipping to minimize extra work for our customers and to prevent any damage in shipping.

Aluminum

We have the capability to cut up to 3/8" thick Aluminum

Largest sheet size is 5'x10' for all thicknesses. We do not stock sheets of Aluminum due to it's soft nature which makes it susceptible to damage. All aluminum material is ordered as needed.

Laser tolerances are +/-.004"

Aluminum can be a tricky material to laser cut. It is a soft material which leads to quick cutting, but you most always have burr or slag that has to be cleaned because of this reason. We take steps to protect the surface as much as possible, but it is still common for parts to have some minor blemishes.

Plastics, Composites & Wood

We have the capability to cut up to 1" thick in these materials.

Largest sheet size is 5'x10' for all thicknesses.

Laser tolerances are +/-.004"

Specialty materials generally have a smoke or soot residue left on them from the cutting process. If this causes an issue with your application let us know and we can look into removing this for you prior to shipping. For materials such as Neoprene a simple solution of Dish Soap and warm water removes the residue without issue.

2018 Logo copy.jpg

Virginia Laser Corporation

18284 Oak Park Drive

Abingdon, Va. 24210

Phone: (276)676-0056 Fax: (276)676-0057

email:sales@virginialaser.net

​

Follow Us:

  • White Facebook Icon
  • White LinkedIn Icon
  • White Google Places Icon
  • Instagram
Guarentee

©2018 by Virginia Laser Corporation.

bottom of page